Specifications

AdderLink X-Series Installation and Use Page 32
Short patch cables are provided with the power distribution module to connect its
four power outlets to the rack mounted X-KVM/R modules. A power indicator on the
power distribution module confirm that power is available. The power distribution
module’s power outlets are designed to provide 500mA of current at 5 volts.
Patch cables are available to enable the local transmitter to be connected to the
power distribution module — Please contact your supplier.
3.3 Blanking plates for the 19 inch rack mount chassis
The 19 inch rack mount chassis may be populated with any mixture of X-Series
modules. Each chassis will house up to 16 modules. If the chassis is not fully
populated then unused mounting positions (slots) may be left empty.
In some installations it is necessary to ensure that there are no gaps in the front face
of the chassis assembly so that the airflow and cooling characteristics of the rack
are maintained. In these installations, unused slots may be filled (blanked off) using
X-Series blanking plates. These are available to blank off one or four slots. Part
codes are:
X-RMK-BLANK Single slot blanking plate
X-RMK-BLANK4 Quad slot blanking plate