Specifications

AdderLink X-Series Installation and Use Page 30
3. Rack mounting X-Series products in the 19
inch rack mount chassis
3.1 Mounting X-Series modules into the rack mount chassis
X-Series products may be rack mounted in the X-Series 19 inch rack mounting
chassis (part code X-RMK-CHASSIS). Up to 16 X-Series modules may be mounted
in each 2U chassis. You will need to purchase a rack securing plate for each module
that you wish to mount in the chassis. Part codes for the rack securing plates are as
follows:
X-Series module Rack securing plate
X-KVM local transmitter X-RMK-KVM/T
X-KVM remote receiver X-RMK-KVM/R
X-SC skew compensator unit X-RMK-SC
Each rack securing plate is provided with two counter-sunk screws which may be
used to attach the securing plate to the X-Series module.
1. Attach the securing plate to the module using the two counter-sunk screws
provided.
2. Offer the assembly into the rack mounting chassis as shown in figure 10 and
locate the module so that the two pan head screws fit inside the mating fixing
holes in the base of the rack mount chassis.
3. Use the pan head screw to attach the securing plate to the rack mount chassis.