Phau Ntawv Qhia

INSTALLATION
2
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
AdderLink XD522 is a high performance DisplayPort KVM
(Keyboard, Video, Mouse) extender that enables you to locate
your critical computing hardware in a secure and temperature
controlled environment away from the user work station whilst
maintaining the same user desktop experience.
Using either one or two CATx cable links you can achieve
separation distances of up to 150 meters/492 feet between the
AdderLink XD522 transmitter and receiver units. At such distances
the units can transfer high resolution DisplayPort video, USB 2.0
(low/full and Hi-Speed), digital and analog audio plus RS232 serial.
The units actively monitor the link quality and at link distances
of less than 100 meters/328 feet, High Rate Mode* becomes
possible; providing a second video port and more than twice the
video bandwidth capability. In High Rate Mode, there is more than
enough video bandwidth to support a single very high resolution
2560 x 1600 display or two 1920 x 1200 displays (@ 60Hz refresh)
or even 4K video - 4096 x 2160 (@ 30Hz refresh, single display).
For AdderLink XD522 modules with rmware version 2.01
or later, the DisplayPort Audio and High Dynamic Range video
capabilities are fully supported.
• For DisplayPort Audio, providing your host PC video circuitry
and video display support the standard, up to eight channels of
digital audio can be extended across the link.
• High Dynamic Range (HDR) supports a 10-bit color depth,
allowing the primary video display to show a wider gamut of
1.06 billion colours rather than the usual 16 million (when using
an 8 bit colour depth). Note: The maximum video resolution is
reduced slightly when HDR 10-bit color is used.
* subject to link cable quality
AdderLink XD522
Transmitter
AdderLink XD522
Receiver
Main CATx link carries:
Video
Keyboard/mouse True USB Emulation
Audio
RS232 Serial
Optional CATx link
carries:
Hi-Speed USB only
Introduction