Manualshelf

Phau Ntawv Qhia

ManualsBrandsADDER ManualsKVM ExtenderADDER AdderLink XD522 KVM Extender
11121314151617181920
Table Of Contents
19
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Power connection
Each AdderLink XD522 unit is supplied with a 20W power adaptor. There is no on/off
switch on the unit, so operation begins as soon as a power adaptor is connected.
To connect the power supply
1 Attach the output lead from the power
adaptor to the 5V socket on the rear panel
of the unit.
Note: Both the unit and its power supply generate heat when in operation and will become
warm to the touch. Do not enclose them or place them in locations where air cannot circulate
to cool the equipment. Do not operate the equipment in ambient temperatures exceeding
40 degrees Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
3 Connect the power lead to a nearby mains supply socket.
2 Connect the IEC connector of the supplied country-specic power lead to the socket
of the power adaptor.