Phau Ntawv Qhia

INSTALLATIONCONFIGURATIONOPERATION

FURTHER

INFORMATION

INDEX

USB connections

The AdderLink XD522 receiver provides four USB sockets on its front face:

From USB

device

To connect the USB ports

1 Connect the cable from your USB device to one of the vacant USB sockets on the

receiver front panel.

 For Hi-Speed USB peripherals, such as mass storage devices,

use socket

Note: Low/full speed USB devices can be used on port B; the transfer speed will be automatically

reduced to support them.

These three sockets are all

labeled

and provide

True Emulation ports for

low/full speed USB keyboards

and mice only. These are also

suitable for providing power

to 3rd party DisplayPort

adaptors.

The fourth socket is labeled and

delivers Hi-Speed USB providing that:

• One of the host computer’s USB

sockets is connected to the Link B

socket on the AdderLink XD522

transmitter and supports USB v2.0,

and

• The second CATx link (B) is in place.