User guide

Page | 18
User Guide
6.3.10. Resetting the switching counter values of the relays
This command enables to reset the switching counter values of the Relays.
Command to be sent to the ePowerSwitch 8XS:
/RC[CR]
Reply from the ePowerSwitch 8XS:
No reply
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
6.3.11. Restoring to factory settings
This command enables to restore all factory settings.
Command to be sent to the ePowerSwitch 8XS:
/FS[CR]
Reply from the ePowerSwitch 8XS:
No reply
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].