User guide

Page | 8
User Guide
4. Connection to a Master
Make sure that all the ePowerSwitch devices are powered off.
Connection Instructions
1. Connect the appropriate link-up cable to one of the xBus connector of the ePowerSwitch Master and
to one of the xBus connector of the ePowerSwitch 8XS. To cascade several Satellites, link the second
xBus connector of a Satellite with one of the xBus connector of the next Satellite.
Master unit
Link-up cable to the first satellite Link-up cable to the next satellites
EPS M8 RJ9M - DB9M
(Réf RJ9-DB9M 180, must be ordered
separately)
(up to 4 Satellite units)
RJ45M - RJ45M or RJ11M - RJ45M
(see supplied cable set)
EPS 4M+
EPS 8M+
EPS 8M+
R2
VizioGuard
Tiny
RJ45M - RJ45M (use supplied cable) (up to 4 Satellite units)
RJ45M - RJ45M
EPS 8XM
VizioGuard
RJ45M - RJ45M (use supplied cable) (up to 16 Satellite units)
RJ45M - RJ45M
2 3 4
DC
DRY CONTACTS
MAX 24VDC - 20mA
12VDC AUX
POWER SUPPLY
I/O
A 1 2 3 4
10/100
Link 100
RS232 x Bus Te r m
S B 5 6 7 8 1
RS232Slct
Te r m
86 7
x Bus
3 4 5
Power
2B 1A
RS232Slct
Te r m
86 7
x Bus
3 4 5
Power
2B 1A