Technical data

A total of 255 rules can be created and there are 6 different types of rules:

1. Schedule Rule:

This rule can be used to trigger user-specified actions according to a defined time table.

2. Ping Monitoring Rule:

This rule is used to control actions according to the response to a Ping command.

3. Scan Monitoring Rule:

This rule is used to control actions according to the response to a Scan command.

4. Power Supply Monitoring Rule:

This rule is used to control actions according to the state of the power supplies of the ePowerSwitch 8XM

and its peripherals like the ePowerSwitch 8XS and the Digital Input Module.

5. Digital Input Monitoring Rule:

This rule is used to control actions according to the state of a dry contact from the I/O Extension Module

connected to the ePowerSwitch*8XM, to a Digital Input Module, Proximity Sensor or a Push Button

connected over the xBus to the ePowerSwitch 8XM.

6. Analog Input Monitoring Rule:

This rule is used to control actions when an analog input (temperature, humidity, ambient light, current...)

exceeds a predefined value.