Technical data

10
DHCP:
Check this box is you want to obtain the IP address, the subnet mask and the default gateway for your
ePowerSwitch 8XM via DHCP.
Use of DHCP (Dynamic Host Configuration Protocol) requires a DHCP host to be set up on the
network.
IP Address:
IP address of the ePowerSwitch 8XM, default is 192.168.100.200.
Subnet Mask:
Subnet Mask of the ePowerSwitch 8XM, default is 255.255.255.0.
Gateway:
Generally the address of your router, default is blank.
DNS 1:
Primary DNS (Domain Name Server), default is blank.
DNS 2:
Secondary DNS, default is blank.
Version:
Firmware version of the ePowerSwitch 8XM
Finder authorized:
The Network parameters of the ePowerSwitch 8XM can be configured through a Local Area Network
using the provided Finder Program. It is a simple and fast configuration method if you use Windows as
operating system.
!!! The Finder Program is enabled as default value. For security reasons we suggest to disable the
Finder program after the first configuration.
HTTP / HTTPS Access:
These options enable to choose between the standard HTTP and the HTTP over SSL protocol.
HTTPS encrypts and decrypts the page requests and page information between the client browser and
the web server of the ePowerSwitch 8XM using a Secure Socket Layer (SSL). A URL beginning with
HTTPS indicates that the connection is encrypted using SSL. SSL transactions are negotiated by means
of a Key-based encryption algorithm between your browser and the web server of your ePowerSwitch
8XM.
The HTTP protocol is enabled as default value.
HTTP Port Number:
Port number: default is 80 (HTTP).
Standard HTTP port is 80.
Standard HTTPS port is 443.