Technical data

ePowerSwitch 8XM / 8XS

3. Diagram

3.1 The Front Panel of the ePowerSwitch 8XM (Master)

5 LEDs (Group A)

A = Power Supply A

1 - 4 = Status of Outlets 1 - 4

Dip Switches

x Bus Termination

Auxiliary Power Supply

For the Web Server only

12 VDC 300 mA

SUB-D 25F Connector

8 Inputs / 4 Dry Contact Outputs

LEDs (Group B)

S= Status

B = Power Supply B

Status of Outlets 5

LEDs DC (Dry Contact)

Status of Output Contacts 1 - 4

SUB-D9F Connector

Terminal Connection

RJ11 Connectors

Cascading Connection

RJ45 Connector

Ethernet Network

A 1 2 3 4 (LEDs)

A Green. Lights up when Power applied on Group A

1 Red. Status of Power Outlets 1

2 Red. Status of Power Outlets 2

3 Red. Status of Power Outlets 3

4 Red. Status of Power Outlets 4

10/100 (RJ45 Connector)

Network connection 10/100 Mbits/sec

Link (LED)

Off = Network connection not detected

On = Network connection detected

Flashing = the device is sending or receiving data over this port

100 (LED)

Off = 10 Mbits/sec connection

On = 100 Mbits/sec connection

RS232 (SUB-D 9F Connector)

Serial port RS232 with DB-9 female connector

Pinout

2 = TxD

3 = RxD

5 = Gnd