Technical data

ePowerSwitch 8XM / 8XS
SysLog Messages: Severity Level Definitions
The Emergency level is the most severe type of message generated by ePowerSwitch 8XM and the Debug
severity level is the least severe one.
Severity Level 0, Emergency: system is unusable
The following messages appear at severity 0:
Continuous error!
An SMTP Client could not be created
Severity Level 1, Alert: action must be taken immediately
The following messages appear at severity 1:
Settings have been reinitialized through the serial connection
ePowerSwitch 8XM does not respond
Satellite "number" does not respond.
Sensor "number" does not respond.
Failure on Power Input A of Master M0
Failure on Power Input B of Master M0
Failure on auxiliary Power Input of Master M0
Failure on Power Input A of Satellite (number)
Failure on Power Input B of Satellite (number)
I/O Extension Module has been disconnected
A Mail could not be sent "subject" to "name"
SMTP Client not available: a Mail could not be sent "subject" to "name"
Severity Level 2, Critical: critical conditions
The following messages appear at severity 2:
"file" config corrupted : restoring default values
Severity Level 3, Error: error conditions, Necessary action is required.
ePowerSwitch 8XM doesn't generate Severity Level 3.
Severity Level 4, Warning: warning conditions, a minor condition has occurred.
The following messages appear at severity 4:
Settings have been changed through the serial connection
Settings have been changed through the network by User "name"
Severity Level 5, Notice: normal but significant condition has occurred.
The following messages appear at severity 5:
Master M0 has been connected
Satellite (number) has been connected
Sensor (number) has been connected
SSL Key has been reinitialized through the serial connection
System has been restarted through the serial connection
Power Supply A of Master restored
Power Supply B of Master restored
Auxiliary Power Supply of Master restored
Power Supply A of Satellite (number) restored
Power Supply B of Satellite (number) restored
I/O Extension Module has been connected
Rule (number) : Outlet (number) of Master has been switched ON
Rule (number) : Group (number) has been switched ON
Rule (number) : Dry Contact Output (number) has been opened
Rule (number) : Mail "subject" has been sent to "name"
57