Technical data

ePowerSwitch 8XM / 8XS
8.3.10 Resetting the Switching Counter Values of the Relays
This command enables to reset the switching counter values of the Relays.
Command to be sent to the ePowerSwitch 8XS:
/RC[CR]
Reply from the ePowerSwitch 8XS:
No reply
Remarks:
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by the
character [CR].
8.3.11 Restoring to Factory Settings
This command enables to restore all factory settings.
Command to be sent to the ePowerSwitch 8XS:
/FS[CR]
Reply from the ePowerSwitch 8XS:
No reply
Remarks:
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by the
character [CR].
53