Technical data

CHAPTER 6: Controlling the Power Outlets of the Master and the Satellites

6. Controlling the Power Outlets of the Master and

Satellites

1. Start your Web browser and type the IP address of your ePowerSwitch 8XM.

The browser displays the authentication dialog box.

2. Enter a user name and its corresponding password.

 If you log in as system administrator, you will be able to:

- control individually all the power outlets and all the power outlets groups of the ePowerSwitch

Master,

- control all the power outlets and all the power outlet groups of the connected ePowerSwitch

satellites,

- display the values of all the connected temperature and humidity sensors,

- display the connection status of the I/O extension module and the status of the eight dry contact

inputs.

 If you log in as a user (ePowerSwitch 518 MA handles up to 255 accounts), you will be able to:

- control individually all the power outlets and all the power outlet groups for which you have the

rights,

- display the values of all the connected temperature and humidity sensors for which you have the

rights

The ON button allows you to switch to ON the corresponding Power Outlet or group of Power Outlets.

The OFF button allows you to switch to OFF the corresponding Power Outlet or group of Power Outlets.

The Restart button allows you to switch OFF the corresponding Power Outlet or group of Power

Outlets.The Power Outlet(s) will then be automatically switched ON after the delay defined by the

administrator during the configuration (default value is 10 sec).