Technical data

Chapter Description
Chapter 1 Safety Instructions
This chapter contains important safety instructions you should know before working with
ePowerSwitch 8XM and 8XS.
IMPORTANT SAFETY INSTRUCTIONS TO BE READ
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any ePowerSwitch device:
- be aware of the hazards involved with electrical circuitry
- be familiar with the practices for preventing accidents
SAVE THESE INSTRUCTIONS !
Chapter 2 Description
This chapter introduces you to the ePowerSwitch 8XM and 8XS Packing List. It also
introduces the ePowerSwitch accessories (temperature sensor, temperature/humidity sensor
and the I/O Extension Board)
Chapter 3 Diagram
This chapter describes the Front and Back Panel of the ePowerSwitch 8XM and the
ePowerSwitch 8XS.
Chapter 4 Installation the ePowerSwitch 8XM
This chapter describes how to install the ePowerSwitch 8XM.
Chapter 5 Configuring the ePowerSwitch 8XM
This chapter describes how to configure the ePowerSwitch 8XM.
Chapter 6 Controlling the Power Outlets
This chapter describes how to control the Power Outlets of the Master and the Satellite over
IP.
Chapter 7 Installation the ePowerSwitch 8XS
This chapter describes how to install the ePowerSwitch 8XS.
Chapter 8 Controlling the Power Outlets of ePowerSwitch Satellites using a terminal connection
This chapter describes how to control the Power Outlets of the ePowerSwitch 8XS.
Chapter 9 Accessories
This chapter describes the accessories, which can be connected to the ePowerSwitch 8XM.
Annexes Ping and Scan method
Commonly used ports
SysLog Messages: Severity Level Definitions
Pinout of the RJ11 6/6 x-Bus connector
Technical Data
1