Technical data

ePowerSwitch 8XM / 8XS
5.3.8 Settings / Sensors Page
This page is used to configure the temperature and humidity sensors.
Sensor Id
The ePowerSwitch 8XM automatically creates an ID Code to clearly identify each Sensor. All the ID Codes
used to identify Sensors start with the character "T" followed by a number identifying each Sensor.
Sensor Name
In this field, enter the name you want to give to the selected sensor. The name can be from 1 to 32
characters long, and can contain alphanumeric characters.
Sensor Type
In this drop-down list, choose the sensor type you want to use.
LOGOUT
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES
Click "Discard Changes" at the bottom of the page to discard all changes you have made on this page.
APPLY CHANGES
Click "Apply Changes" at the bottom of the page to save changes.
27