Technical data

CHAPTER 5: Configuring the ePowerSwitch 8XM
Default Power-Up Delay
In the drop-down lists choose for each power outlet the default status to apply after power-up.
You can choose between:
- On if you want the corresponding power outlet to be always switched to On after power-up.
- Off if you want the corresponding power outlet to be always switched to Off after power-up.
- Last Status if you want that the corresponding power outlet takes again the state it was in the before power
failure.
Delay before Restart
In this fields, enter the Restart Delay you want to define for each power outlet. Restart delay means how long
the plug will remain Off before it is switched back On again after a restart operation.
The delay can be set between 0 and 65535 seconds.
LOGOUT
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES
Click "Apply Changes" at the bottom of the page to save changes.
26