Technical data

ePowerSwitch 8XM / 8XS
5.3.7 Settings / Power Outlets Page
This page is used to configure all the power outlets of the ePowerSwitch 8XM and all ePowerSwitch 8XS.
The main page is also very usefull to give on an overview of all the ePowerSwitch 8XS that are activated and
detected by the ePowerSwitch 8XM.
- To activate an ePowerSwitch 8XS check the box "Activated" of the corresponding ePowerSwitch 8XS. The
ePowerSwitch 8XM can not be deactivated.
- To deactivate an ePowerSwitch 8XS uncheck the box "Activated" of the corresponding ePowerSwitch 8XS.
Even if the device remains physically connected to the Master, its power outlets will no longer be accessible
by its authorized users.
- To configure or modify the settings of an ePowerSwitch device, click on "Edit" of the correponding device.
A new page appears allowing you to set all parameters of the group.
ID
The ePowerSwitch 8XM automatically creates an ID Code to clearly identify each Power Outlet.
- All the ID Codes used to identify the power outlets of an ePowerSwitch 8XM start with the character "M"
followed by a number identifying each power outlet.
- All the ID Codes used to identify the power outlets of an ePowerSwitch 8XS start with the character "S"
followed by a number identifying each power outlet.
Name
In this fields, enter the name you want to give to the selected device and to each of its power outlets. The
name can be from 1 to 32 characters long, and can contain alphanumeric characters.
25