Technical data

ePowerSwitch 8XM / 8XS
Power Outlets
This field is used to add and remove power outlets to/from the current account.
- To add power outlets to the current account, press the Ctrl key and click on the power outlets device
selected in the field above. The selected power outlets are marked dark blue and their names are listed at
the right of the field "Power Outlets".
Sensor
In this drop-down list, choose the sensor box you want to add to the current account.
The ePowerSwitch 8XM supports up to 4 sensor boxes (currently for temperature or temperatur and
humidity) identified by ID Codes T1 to T4. A character between brackets can follow this ID Code:
- The "X" character means that the corresponding sensor is physically not connected.
- The "!" character means that the corresponding sensor is physically connected but not activated. If you
want to activate it, go to the "Settings/Sensor" tab.
- The " " character (blank) means that the corresponding sensor is physically connected and activated.
Sensor Type
This field is used to add and remove sensor types to/from the current account.
- To add sensor types (temperature or humidity) to the current account, press the Ctrl key and click on the
sensor type of the device selected in the field above. The selected sensors are marked dark blue and their
names are listed at the right of the field "Power Outlets".
- To remove a sensor type, press the Ctrl key and click on the sensor type you wish to remove.
LOGOUT
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES
Click "Apply Changes" at the bottom of the page to save changes.
23