Technical data

CHAPTER 5: Configuring the ePowerSwitch 8XM
5.3.1 General / IP Configuration Page
This page enables you to define all the IP parameters of the ePowerSwitch 8XM device (IP Address, Subnet
Mask, Default Gateway, Primary and Secondary DNS Server).
DHCP Client enabled
If this check box is selected, the web server will automatically initialize the IP address from a DHCP host and
disable manual IP address setup. Factory default setting for this option is enabled.
Note : Use of DHCP (Dynamic Host Configuration Protocol) requires a DHCP host to be set up on the
network.
IP Address
IP address of ePowerSwitch 6XM, default is 192.168.100.200.
Note: If you change the IP address, the system needs to compute new SSL keys.. This operation takes
several minutes and the LED marked "S" on the front panel blinks 3 times repeatedly during all the process.
During all this time, you cannot login.
Subnet Mask:
Subnet Mask of ePowerSwitch, default is 255.255.255.0.
Default Gateway:
Generally the address of your router, default is blank
Primary DNS Address
Primary DNS (Domain Name Server), default is blank
Secondary DNS Address
Secondary DNS, default is blank
Finder Program enabled
The Network parameters of the ePowerSwitch 8XM (IP address, Default Gateway...) can also be configured
through a network using the provided Finder Program. It is the simplest and fastest configuration method if
you use Windows as an operating system.
If you do not want to use the Finder Program, uncheck the box "Finder program enabled".
LOGOUT
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES
Click "Apply Changes" at the bottom of the page to save changes.
18