Technical data

CHAPTER 3: Diagram
3.3 The Front Panel of the ePowerSwitch 8XS (Satellite)
SUB-D9F Connector
Terminal Connexion
LEDs
A = Power Supply A
B = Power Supply B
1
-
8
=
Status of Outlets 1
-
8
Dip Switches
1 - 4 : physical address of device
5 - 6 xBUS Termination
RJ11 Connectors
Cascading Connection
A B 1 2 3 4 5 6 7 8 (LEDs)
A Green. Lights up when Power applied on Group A
B Green. Lights up when Power applied on Group B
1 Red. Status of Power Outlets 1
2 Red. Status of Power Outlets 2
3 Red. Status of Power Outlets 3
4 Red. Status of Power Outlets 4
5 Red. Status of Power Outlets 5
6 Red. Status of Power Outlets 6
7 Red. Status of Power Outlets 7
8 Red. Status of Power Outlets 8
Dip Switches
1 - 4: physical address of device
5 – 6: x Bus Termination
RS232 (SUB-D 9F Connector)
Serial port RS232 with DB-9 female connector
Pinout
2 = RxD
3 = TxD
5 = Gnd
xBus (RS485)
These connectors are used for cascading ePowerSwitch devices together,
up to 16 ePowerSwitch Satellite and up to 4 Temperature / Humidity sensors.
Maximal TOTAL line length: 4.000 feet / 1.200 Meters
10