Specifications

 


8
g
4 Audio: Where required, connect the lead from
your speakers to the audio socket.
3 USB devices: Where required, attach the leads from
your USB peripherals to the USB sockets labelled
USB1andUSB2.
Connections
Connections do not need to be carried out in the order given within this guide,
however, where possible connect the power in as a final step
User console
The ports that make up the user console are where you attach the peripherals
whichwillbesharedbetweenthecomputersystems.Ensurethatpoweris
disconnected from the unit.
To connect peripherals to the user console
1 Positionyourperipheraldevicesinthevicinityoftheunitsuchthattheir
cables will easily reach.
2 Keyboard and mouse: Attach the leads
from your USB keyboard and mouse to
the USB sockets specifically labelled with
keyboard and mouse symbols. The keyboard
and mouse will operate in any of the USB
sockets, however, True Emulation is not
availableonsocketslabelledUSB1
orUSB2.
5V
2.5A
I N D O O R
U S E
O N LY
OPTIONS
1
5V
2.5A
I N D O O R
U S E
O N LY
OPTIONS
From speakers
From USB keyboard and mouse
From USB peripherals
Computer systems
EachcomputersystemisconnectedtotheCCS4-USBunitusing(upto)twocables.
To connect a computer system
1 EnsurethatpowerisdisconnectedfromtheCCS4-USBunitandthesystem
to be connected.
2 UseaUSBcable(type-Atotype-B)tolinkaUSBport
on the computer system to the USB port of the
required channel on the rear of the unit.
3 If required, use a stereo audio link cable (3.5mm
jacks at either end) to link the speaker port on
the computer system to the audio port of
the required channel on the rear of
the unit.
2 1
USB and audio
links to a system