Specifications

 


20
g
To lock access to the computers
When privacy is required, you can lock access to the connected computers via
the unit.
To lock the unit
1 Simultaneouslypressandhold and (or other hotkeys, if altered).
2 Whilestillholding and , press .
The display will show (providing a valid password has been previously set).
You will not be able to access any computers until the password is correctly
entered.
To unlock the unit
• Whenprompted,enterthecorrectpasswordandpress .
To set a new password
1 EntertheConfiguration menu.
2 Press and then . The display will show
3 Enteranewpasswordandthen .
The password is not case sensitive and can be any combination of key
strokes, including the function keys, but excluding the Num Lock, Caps Lock,
Scroll Lock and keys. If your keyboard has special media keys, these also
cannot be used as part of the password.
When you have typed in your password, press tostoreit.Don’tworryif
you type the password incorrectly, you can always re-enter configure mode
and set the password again.
4 Press
and then
to exit the menu and save changes.
To cancel the password
1 EntertheConfiguration menu.
2 Press and then . The display will show
3 Press to remove the existing password.
4 Press and then
to exit the menu and save changes.
If you forget the password
Toclearanexistingpassword:ConnecttheOPTIONSportoftheunittotheserial
port of a computer and transmit the text clrpwd to the unit.