Specifications

 


14
g
Optional Free-Flow operations and settings
Downloading the existing layout from the CCS4-USB.
If the CCS4-USB unit has already been configured and you wish to alter it (and
you don’t have a saved .ffc config file), use the Configure > Receive Layout
from Switch option to retrieve the current configuration from the CCS4-USB.
Mouse... setting
Enable (Disable) Free-Flow
This option allows you to switch off the Free-Flow feature within the CCS4-USB
unit. Located within Configure > Switch... menu item, untick the Enable Free-
Flow checkbox and download the configuration the CCS4-USB unit to disable.
Start-up Port
Located within Configure > Switch... menu item (see above image), this option
allows you to determine which port should be enabled whenever the CCS4-USB
unit is first powered on.
Switch Mode
Located within Configure > Switch... menu item (see above image), these
check boxes allow you to determine which peripherals should be switched
whenever the channel is changed by the Free-Flow method. The switching of
peripherals via the other methods of channels selection (e.g. the front panel,
hotkeys, mouse buttons, etc.) remain unaffected by these settings. By default,
theKeyboard/MouseandAudioareselected.
Mouse acceleration
Mouseaccelerationallowsyoutomovethemousepointerquicklyacrossthe
large areas of the screen in response to small but sharp shifts in the mouse
position. The Configure > Mouse... option provides settings between 0 and 50,
however,avalueof12to15willgiveatypicalWindows-likedefaultoperation.
Switch... settings