User guide
29
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Selecting a computer using the mouse buttons
Using the mouse buttons, you can quickly switch the keyboard and mouse, speakers and/
or USB peripherals to any computer channel.
Note: These procedures work only with three-button or IntelliMouse devices and only if the
‘Mouse switching’ option has been enabled (within the General conguration page of the CCS
Manager).
To select a computer using the mouse buttons
1 Hold down the middle button (or scroll wheel) of the mouse.
2 Click the left mouse button to increment the channel number or click the right mouse
button to decrement the channel. When the correct channel is reached, release the
middle button.
When using this method of switching:
• The computer channels that are visited depend upon the conguration menu
setting (see note
).
• The ports (K/M, audio and/or USB) that are switched using this method depend
upon the switching mode that is currently set using the control panel buttons.
Choosing which computers are accessed when using mouse buttons
The computer channels that are visited when you use the hot keys + tab (or mouse
buttons) are determined by a setting within the Conguration menu:
1 Enter the General conguration page of the CCS Manager.
2 Choose the required Port cycling option, either:
• Cycle all ports (visits even inactive ports), or
• Cycle only active ports.
3 Click the Save button.