User guide
23
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Multi-Monitor Free-Flow conguration
Installing drivers and multi-monitor cong app
In order to use Multi-Monitor mode you will need to install a Multi-Monitor Free-Flow
driver (available for download from the Adder website www.adder.com) onto each PC
that has multiple monitors attached.
1 On each multiple monitor PC, run the downloaded le. After accepting the licence
agreement you will be prompted to choose a destination folder. Either accept the
suggested location or change it, as necessary.
Note: The Install for all users option should be ticked if there are more
than one user account on the PC and all need to use Free-Flow.
2 The options available during installation are as follows:
• Full Install, (this is recommended), or
• Options to install individually:
• Conguration App
This is the Free-Flow application and needs to be installed only on the PC that
will be used to set up the CCS-PRO4 switch via the network port.
• Visual C++ Runtime
The C++ runtime library is a windows component that is required by the
multi-monitor driver in order to run its helper applications. It is pre-installed
with Windows but is offered here as an option as you may want to keep an
older version already installed on your system, or you may already have a newer
version in your copy of Windows.
• Drivers
Multi-Monitor Free-Flow drivers that are required on each PC that will be using
Multi-Monitor.
Choose the required components and click the Next > button.
3 Once the chosen components have been installed, click the Finish button.
Note: On the PC that will be used to set up the CCS-PRO4 switch, you can optionally tick
‘Click to run the Free-Flow Conguration Application’ in the lower left corner to immediately
begin using Free-Flow - see Conguring multiple monitors on the next page for details.
Note: On each PC that you installed the driver, a process called mumoapp.exe will remain
running.
(Windows only)