User guide
16
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
General conguration
The General conguration page contains various switching and identication options.
To display the General conguration page
1 Access the CCS Manager.
2 On the left side, click the Conguration button.
Basic options
Within the General conguration page you can adjust various Basic options:
• Hotkeys - CCS-PRO4 switches use and
as their standard hotkeys. These can
be changed if they clash with other software or hardware within the installation (Ctrl +
Shift, Alt + Shift, .Right Alt, etc.).
• Default switching mode - Determines the standard switching mode to be used at
power on (All, KM + speaker, KM only, etc.).
• Mouse switching - You can enable or disable mouse switching to suit your
installation requirements.
• Options port mode - Determines how the serial Options port should function.
Choices are Serial control to received switching commands from a computer or RC4
compatible for use with the optional Adder RC4 remote control.
• Options port speed - When the setting above is set to Serial control, this setting
allows you to choose the communication speed (110 to 230400 baud).
• Port cycling - Determines which computer ports should be visited when the user
issues an instruction (either by mouse buttons or keyboard hotkeys + tab) to cycle to
the next port. Options are Cycle all ports (even those that are not active) or Cycle only
active ports.
Switch identication
This section allows you to optionally apply Name, Description and Location details to the
CCS-PRO4. For larger installations where multiple units exist, this information can be
very useful for identication purposes. Additionally, the Name entry is also used when
performing a DHCP search.
If the Name and Location entries are set, they will be displayed at the top of each CCS
Manager page as the Switch ID (replacing the MAC address).