User guide

15
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Status page
The Status page provides details about the dual power inputs, the internal operating
temperature and also allows you to switch peripheral channels.
To display the Status page
1 Access the CCS Manager.
2 The Status page is the rst to be displayed, however, if necessary, click the Status
button shown on the left side: The page will be displayed:
Channel control
The Channel control section shows the computers to which each of the user console
peripheral channels are switched. You can use these entries to individually switch each
peripheral to any of the four computers.
To switch peripherals between channels
1 Access the CCS Manager.
2 If necessary, on the left side, click the Status button.
3 In the Channel control section, click the numeric eld to
the right of the required peripheral channel, (e.g. KM channel,
speaker channel, etc.) to reveal a drop down list.
4 Click the number of the computer to which the peripheral
should be switched. The CCS-PRO4 front panel display will
respond when peripheral channels are switched:
• The main seven digit number shows the computer to which
the KM (Keyboard and Mouse) channel is connected.
• If any of the other three channels are switched to a different channel than the KM,
their respective indicators will ash.
Provides power
input and internal
temperature details as
well as the unit’s xed
MAC address.
Indicates to which computer
channels the various user console
peripherals are currently connected.
You can click these to switch any
peripheral to another channel.
Click here to
choose the
required page.