User Guide

16
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
To get here
1 On the console keyboard, enter the following in succession:
Left Ctrl then Left Ctrl then o (upper or lower case accepted)
2 Click the Advanced Operation menu item.
OSD - Advanced Operation
Reset to Factory Defaults
Removes all user entered conguration details. This operation cannot be
undone.
Note: To avoid accidental resets, press and hold (for roughly 4 seconds).
Reset Device
Effectively reboots the multi-viewer.
Note: To avoid accidental resets, press and hold (for roughly 4 seconds).