User guide

 




20
To select a computer using the mouse buttons
Using the mouse buttons, you can quickly switch the keyboard, mouse, video
monitor(s), speakers and/or USB peripherals to any computer channel.
Note: These procedures work only with three-button or IntelliMouse devices and
only if the ‘Mouse Switching’ option has been enabled.
To select a computer using the mouse buttons
1 Hold down the middle button (or scroll wheel) of the mouse.
2 Clicktheleftmousebuttontoincrementthechannelnumberorclickthe
right mouse button to decrement the channel. When the correct channel is
reached, release the middle button.
When using this method of switching:
• Thecomputerchannelsthatarevisiteddependupontheconguration
menu setting (see note

).
• Theports(KVM,audioand/orUSB)thatareswitchedusingthismethod
depend upon the switching mode that is currently set using the front
panel buttons.
Choosing which computers are accessed when using mouse buttons
The computer channels that are visited when you use the mouse buttons (or
hotkeys+tab/autoscan)aredeterminedbyasettingwithintheConguration
menu:
1 Enter the Configuration menu.
2 Press and then press either:
to choose Cycle all ports, or
to choose Cycle only active ports
3 Press to accept the setting and return to the main menu section.
4 Press and then to exit the menu and save changes.