User guide

 




9
Power in connection
TheAV4PRO-DVIunitissuppliedwitheithera12.5W(singlescreenversion)or
20W(Multiscreenversions)poweradapter.Thereisnoon/offswitchontheunit,
so operation begins as soon as a power adapter is connected.
2 ConnecttheIECconnectorofthesuppliedcountry-specicpowerleadto
the socket of the power adapter.
To connect the power supply
1 Attach the output lead from the power
adapter to the 5V socket on the rear panel
of the unit.
3 Connectthepowerleadtoanearbymainsupplysocket.
Note: Both the unit and its power supply generate heat when in operation and
will become warm to the touch. Do not enclose them or place them in locations
where air cannot circulate to cool the equipment. Do not operate the equipment
in ambient temperatures exceeding 40 degrees Centigrade. Do not place the
products in contact with equipment whose surface temperature exceeds 40
degrees Centigrade.
5V
2A
USER
CONSOLE
OPTIO
Optional RC4 remote control
TheoptionalRC4remotecontrolunit(fullpartnumber:RC4-8P8C)canbeused
to provide direct push button access to any channel from your desktop. The
RC4remotecontrolissuppliedwitha3metrecablethatisusedtolinkwiththe
OPTIONS port on the rear panel of the unit.
To connect the remote control
1 Connecteitherendofthesuppliedcabletothesocketattherearofthe
RC4remotecontrol.
2 ConnecttheotherendofthecabletotheOPTIONS port on the rear panel of
the unit.
4
5V
2A
USER
CONSOLE
OPTIONS