Specifications

AdderView MP Installation and Use Page 36

F1 - Display firmware first digit (Note: F1 is FF followed by 11 NOT ll)

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function to the currently selected CPU’s mouse port

F6 - Restore IntelliMouse function to the currently selected CPU’s mouse port

F8 - Reset all configurations to factory default settings. An ‘r’ will show briefly on the

display to confirm that the reset has been completed.

4.7 Setting a security password

There are many situations where unrestricted access to corporate file servers or

sensitive information needs to be controlled. In such circumstances, the AdderView

MP can be locked away in a room or secure cabinet and controlled remotely. In this

mode typing the keyboard hotkeys together with 'L' will blank the screen, disconnect

the keyboard and mouse from all of the computers and display ‘P’ on the AdderView

MP display. Control can only be regained by typing the correct password on the

keyboard.

To set the password in configure mode, first type ‘P’ then (return). The display on

AdderView MP will change to show ‘=' and you can then type your password. The

password is not case sensitive and can be any combination of key strokes, including

the function keys, but excluding the (ctrl), (alt), (shift) and (return) keys and the keys

that only appear on a Sun type keyboard (i.e. Help, Stop, Again, props, Undo, Front,

Copy, Open, Paste, Find, Cut and the media control keys). When you have typed in

your password type (return) to register it in the stored memory. Do not worry if you

type the password incorrectly, you can always re-enter configure mode and set the

password again. If you have lost the password and the AdderView MP is locked, the

unit may be unlocked by powering down the AdderView MP, entering configure

mode at power on (see section 2.6), and performing a complete reset using the F8

function.

NOTE - The password consists of a combination of key strokes rather like the code

to a safe. The key strokes are not case sensitive and can include all the keys on the

keyboard (except ctrl, alt, shift and enter). Consequently the following 'password'

would be valid:

oFREDoFRED