Specifications

AdderView MP Installation and Use Page 24
The display should now show:
Step 4 - Run the upgrade program
The latest version of the AdderView MP firmware is available from the Adder
Technology website at www.addertec.com. The upgrade files will be supplied to
you as a group and consist of several files as explained below. These files should be
downloaded to the same directory on your computer.
1) A universal upgrade program
AVMP.EXE
2) Binary code files for each of the processors within the AdderView (up to 3)
e.g. MP129M.HEX
MP129S.HEX
MP129U.S19
These files use the following naming scheme. The first two characters are the
product type (e.g. MP = AdderView MP). The next three characters represent the
firmware release version (e.g. 129 equals version 1.29). The last character is
designation that tells the upgrade program where to load the file within the MP.
3) A data file that tells the upgrade program (AVMP.EXE) which binary code files to
download to the AdderView MP and where to put each file. Theoretically this DAT
file can be modified so that only certain processors are upgraded but do not do this
unless specifically instructed by Adder technical support.
e.g. MP129SP.DAT