User Guide

1
3
2
35
46
12
12VDC
Power
in
USB
Primary
display
Primary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
Secondary fiber or copper link (using 1GbE SFP modules) - KVM and VM links
CATx copper link - VM-only link
Primary
SFP port
Secondary
display
Secondary
SFP port
RJ45
network
port
AdderLink
3000
1
2
Reset
switch
Head
phones
Line
out
USB
Mic
Gigabit
Ethernet
Gigabit
Ethernet
www.adder.com
MANAGEMENT SERVER
AIM Server
Status indicator
To perform a manual factory reset
A factory reset returns ALIF3000 unit to its default
conguration.
1 Power on the ALIF3000 unit.
2 Press-and-hold the button located next to the front
panel OLED screen for 10 seconds until the indicator
turns blue and the OLED screen shows the message:
In factory reset mode
3 You can now either:
• Continue with the factory reset: Use a long narrow
implement (e.g. a straightened-out paper clip) to
press-and-release the recessed reset button on the
front panel.
• Return to normal operation without resetting:
Press the button next to the OLED screen again.
4 Once the factory reset has been carried out the unit
should now be ready for discovery by an AIM server.
Connections
ALIF 3000
Searching...
–––––––––––––––
• Off No power.
• Green All services present as
compared to the conguration
required.
• Amber Running but video, USB or
network link missing (or not
connected to a transmitter/VM).
• Red Booting before processor
loaded or failed.
• Blue Factory reset mode active.
• Red/green ash Booting into factory recovery
mode.
• Green/blue ash Upgrade mode active.
• Fast green ash Identify mode active.
Status
indicator
AdderLink