User guide

 




16
AUX
1
RX microphone & speakers
The ALIF unit can support a
microphone as well as speakers
providing the necessary
connections have been made
between the ALIF TX unit and the
host computer.
To connect a microphone (or line in) and/or speakers
1 Connecttheleadfromamonomicrophoneor,alternatively,alinein
connection from an audio device to the 3.5mm socket labelled LINE IN/MIC IN
on the rear panel.
2 Connecttheleadfromstereospeakerstothe3.5mmsocketlabelledLINE
OUT on the rear panel.
LINE IN/
LINE OUT
CONSOLE
MIC IN
Connection from
microphone or line in
from audio device
Link out to speakers
3 Oncetheunithasbeenfullyconnectedandpoweredon,accesstheRX
System Configuration page to check that the Audio Input Type setting
matches the connection that you have made to the port: line, mic or mic
boost(thelatterprovides+20dBgain).
[ALIF1000]
[ALIF2000]
Link out to
speakers
Link in from
microphone
1 Connecttheleadfromamono
microphone to the 3.5mm socket
labelled on the rear panel.
2 Connecttheleadfromstereospeakersto
the 3.5mm socket labelled on the rear
panel.
3 Oncetheunithasbeenfullyconnected
and powered on, access the RX System
Configuration page to check that the
Audio Input Type setting matches the
connection that you have made to the
port: mic or mic boost (the latter provides
+20dBgain).
ALIF TX
LINK
ALIF RX
LINK
VIDEO
DISPLAY
USB
DEVICES
MIC &
SPEAKERS
POWER
IN
SERIAL
LINK