User guide

 




13
TX power in
Each ALIF unit is supplied with an
appropriate power adapter. When
all other connections have been
made, connect and switch on the
power adapter unit.
Note: Please see Power adapter
identification shown opposite.
To apply power in
1 Attachtheoutputleadfromthepoweradaptertothe5V socket on the rear
panel of the unit.
INDOOR
USE ONLY
OPT
1
5V
2.5A
1
2 ConnecttheIECconnectorofthesuppliedcountry-specicpowerleadto
the socket of the power adapter.
3 Connect the power lead to a nearby main supply socket.
Note: Both the unit and its power supply generate heat when in operation and
will become warm to the touch. Do not enclose them or place them in locations
where air cannot circulate to cool the equipment. Do not operate the equipment
in ambient temperatures exceeding 40
o
C. Do not place the products in contact
with equipment whose surface temperature exceeds 40
o
C.
ALIF RX
ALIF TX
VIDEO
LINK
LINK
USB
LINK
AUDIO
LINKS
POWER
IN
SERIAL
LINK
Power lead from
power adapter
Note: Ensure that
Option switches
1 and 2 are both
in the ‘off’ (up)
position to enable
normal operation
of the unit.
Model:
SA06-xxxxx-V
Input: 100-240V
Output:
5V
2.5A (12.5W Max.)
Model: SA06-xxxxx-V
Input: 100-240V
Output: 5V
Model: SA06-xxxxx-V
Input: 100-240V
Output: 5V
2.5A (12.5W Max.) 4A (20W Max.)
12.5W model
(for ALIF1000)
20W model
(for ALIF2000)
Power adapter identification
DuetotheincreasedpowerrequirementsoftheALIF2000series,thesemodels
aresuppliedwithlargercapacity(20W)poweradapters.Thestandard12.5W
andhigherpower20Wadaptersuseidenticalhousings,sowithininstallations
where both types are used, you need to double check the underside labels to
differentiate the two types:
Nodamagewillbecausedifthe12.5Wadapterandthe20Wadapterareused
inplaceofeachotheroneitheroftheALIF1000orALIF2000units.However,
correctoperationofALIF2000unitscanonlybeguaranteedifa20Wpower
adapter is used. Always ensure that only ADDER 5-volt power supplies are used
to power the units.
Power adapter