User guide

56
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Host conguration
This page provides the opportunity to congure various details for each of the host
systems that may be connected to the ALIF 2112T. Each entry can be congured with
a name, the permitted users, the hot key combinations required to switch to it and, if
required, appropriate power control commands.
To create a new host entry
1 Click one of the host entries to reveal a Host conguration dialog.
Name
Enter the name that will be displayed in the viewer window when you click the Host
button.
Users
Select the users that will be permitted to connect to this host. Either enter
*
to allow
all users or a list of users separated by commas.
KVM Switch Macro
Declare the hot key sequence that will cause the KVM switch to link with the required
host system. See Appendix L - Hotkey sequences for details.
Hotkey Host Number
Declare the numeric sequence that is pressed together with the VNC viewer hotkeys
(usually Ctrl + Alt) to select this host system, which is the same value as the KVM port
number.
Power On
Enter the code required to make an attached power control unit apply power to the
host. See Power switching conguration for details.
Power Off
Enter the code required to make an attached power control unit remove power from
the selected host.
Reboot
Enter the code required to make an attached power control unit remove power and
then re-apply it a few seconds later.
2 Enter the required information in each eld.
3 Click the OK button.
To get here
1 Using VNC viewer or a browser, log on as the ‘admin’ user.
2 Click the ‘Congure’ button in the top right corner.
3 Click the ‘Host Conguration’ option.
Sort
Allows you to reorder the list of hosts either alphabetically or by entry number.
Erase Host Conguration
Removes all hosts from the list.