User guide

 sll




7
www.adder.com
AdderLink
ADM
ADM
USR
USR
UNC
UNC
ETH1
ETH1
ETH2
ETH2
PWR
PWR
MANAGEMENT SERVER
Front panel indicators
To assist with operational checks and troubleshooting, the front panel provides
the following indicators:
• ADM On when an administrator is logged in. Flashes when an
administrator is accessing the system.
• USR On if there are any connections between channels/receivers. Flashes
when a user is accessing the system.
• UNC Unconfigured RX or TX units are online
• ETH1 On when connected, flashes with network activity
• ETH2 On when connected, flashes with network activity
• PWR On when power is applied
Installation requirements
• AIMrequiresthatallAdderLinkInnityunitsthatitcontrolshavermware
version 1.9 or greater.
• Whenconguringtheinstallationformulticasting(andtoimproveoverall
performance), the network switch(es) being used must support a minimum
of IGMP v2 snooping. For faster performance use switches that support
IGMP v3.
• Inordertodisplayvideoresolutionsthatuseahorizontalvideoresolutionof
2048 pixels, the network switch must have support for Jumbo packets.
• PleasealsoseeAppendix A - Tips for success when networking ALIF
units.