User guide

 







Connections to user console peripherals

Toconnectakeyboardandmouse

Note: The AdderView Secure unit can directly accommodate only a USB-style

keyboard and mouse. If required, you can use suitably shielded conversion

cables to connect peripherals that have PS/2-style interfaces.

1 Wherever possible, ensure that power is disconnected from the unit and the

hostcomputer(s)tobeconnected.

2 At the far left side of the rear panel, connect the cables from the keyboard

andmousetotheUSBsocketsmarked and respectively.

USER CONSOLE

Toconnectspeakers

1 Wherever possible, ensure that power is disconnected from the unit and the

hostcomputer(s)tobeconnected.

2 At the far left side of the rear panel, connect the speaker cable to the socket

marked