User guide

 


9

Making connections
Connections to the AdderView Secure unit do not need to follow the precise
order given in this user guide, although if one or more systems must be hot-
plugged, connect these after all other connections have been made.
IMPORTANT: All rear panel connectors are clearly marked, however, take great
care not to cross connect any links or devices. You are recommended to connect
all of the input and output links within one channel before proceeding to the
next channel.
Note: In order to minimize signal emissions, you are strongly recommended to
use good quality shielded cables throughout and to fit ferrite cores at each end
of every cable.
Connections to computer systems
Toconnectakeyboardandmouselink
1 Wherever possible, ensure that power is disconnected from the unit and the
hostcomputer(s)tobeconnected.
Toconnectanaudiolink
1 Wherever possible, ensure that power is disconnected from the unit and the
hostcomputer(s)tobeconnected.
2 Attherearpaneloftheunit,choosetheappropriatechannelgroup(1to4)
and connect an audio link cable to the socket marked
2 Attherearpaneloftheunit,choosetheappropriatechannelgroup(1to4)
andconnectaUSBlinkcable(squaretype-Bplug)tothesocketmarked
3 AttachtheotherendoftheUSBlinkcabletoavacantUSBsocketofthe
appropriatehostcomputer(thiswillmostprobablyrequirearectangular
type-AUSBplug).
3 Attach the other end of the audio link cable to the speaker socket of the
appropriate system.
5V
2.0A
INDOOR USE ONLY
2
1
5V
2.0A
INDOOR USE ONLY
2
1