User guide

 


8

Keyboards with integrated smartcard readers
(supported only on enhanced models)
Acombinedkeyboard/smartcardreader(andsmartcards),usedwithenhanced
modelsoftheswitch(AVSC1102-XXandAVSC1104-XX),mustbeapproved
against the security policy of your organization. The combined keyboard/
smartcard reader must be plugged directly into the switch’s USB card reader
port with no adapters or converters.
During the life of the product, the user should make periodic checks to ensure
that the combined keyboard/smartcard reader remains directly connected into
the switch’s USB smartcard port.
The combined keyboard/smartcard reader is powered down and reset at every
switchover to clear stored states.
The keyboard data and smartcard data are separated from each other as soon as
they enter the switch. The keyboard data is then sent uni-directionally through
theswitchinthesamewaythatdatafromasimplekeyboardisprocessed.Only
the smartcard data is handled by the smartcard circuit.
CONSO LE
INDOOR US E ONLY
5V 2.5A
CONSOLE
Note: Standard models of the switch (AVSV1002-XX and AVSV1004-XX) also
have a smartcard USB socket at the rear panel (labeled ), however, it is not
functional on these models.