User guide

 


13

Toconnectadisplaymonitor
1 Wherever possible, ensure that power is disconnected from the unit and the
hostcomputer(s)tobeconnected.
2 Connect a suitable VGA video display to the port labeled within the
Console section on the rear panel. Ensure that the securing screws are used
to maintain reliable links.
Note: We strongly recommend that you use a video cable that has been
correctly screened against signal emissions (such as the VSCD9 cable).
CONSOLE
Note: The use of EDID information (automatically provided by the video display)
could cause issues in certain high security installations - please see the Video
display (EDID) information section for further details).