User guide

 




7
5V
2.5A
USER
CONSOLE
INDOOR USE ONLY
USER
CONSOLE
OPTIONS
1
USB2.0
SWITCHED
USB 1
USB 2
USB2.0
SWITCHED
USB 1
USB 2
5V
2.5A
USER
CONSOLE
INDOOR USE ONLY
USER
CONSOLE
OPTIONS
Connections
Connectionsdonotneedtobecarriedoutintheordergivenwithinthisguide,
however, where possible connect the power in as a final step.
User console
The ports that make up the user console are where you attach the peripherals
that will be shared between the computer systems. Ensure that power is
disconnected from the unit.
To connect peripherals to the user console
1 Position your peripheral devices in the vicinity of the unit such that their
cables will easily reach.
2 Keyboard and mouse: Attach the leads from your USB keyboard and
mouse to the USB sockets specifically labelled with keyboard and mouse
symbols. The keyboard and mouse will operate
in any of the USB sockets, however, True
Emulation is not available on the sockets
labelled USB1 or USB2.
From speakers
4 Video monitor: Attach the DisplayPort lead
from the video monitor to the connector
within the user console area.
From USB keyboard and mouse
5 Audio: Where required, connect the lead from
your speakers to the audio socket.
Note: The unit’s True Emulation
feature will read the full
characteristics of the keyboard
and mouse and will present
those to each connected
computer concurrently.
This ensures that
specialist keyboards
and mice are fully
supported.
From video
monitor
3 USB devices: Where required, attach the leads
from your USB peripherals to the USB sockets
labelled USB1 and USB2.
Note: These sockets provide
enumerated (transparent)
switching.
From USB peripherals
5V
2.5A
USER
CONSOLE
INDOOR USE ONLY
USER
CONSOLE
OPTIONS