User guide

 




4
AV4PRO-DP features - front and rear
The AV4PRO-DP unit is housed within durable, metallic enclosure with all connectors situated at the
rear panel. The smart front face features the control buttons and the operation indicators.
Options port
This 10p10c port can separately support the following functions:
•Remotecontrol-allowsastandardAdderRC4fourbuttonremote
control unit to be used to switch channels (see Optional RC4
remote control for details).
•Upgrades-usedtoupdatetheinternalrmwarewhennecessary
by connecting to a computer.
•Allowssynchronisationbetweenunitsfordualheadoperation.
User console
Connectthe
DisplayPort
video display,
USB keyboard
and mouse
plus optional
speakers
to these
connectors.
Computer channels
Each computer connects to one of these
four channels via a DisplayPort video
connector, a USB B-type connector and
an audio 3.5mm jack input.
Power input
The power supply
connects here.
4321
USB2.0
SWITCHED
USB 1
USB 2
5V
2A
INDOOR USE ONLY
USER
CONSOLE
OPTIONS
User console
Connectuptotwo
USB devices to these
connectors. These ports
are switched in an
enumerated manner
(see What is True
Emulation?)
COMPUTER KVM SPK USB1 USB2 MODE
www.adder.com
Indicators
The four indicators (KVM, SPK, USB1, USB2) show which
peripherals are switched to the current computer channel OR
(as you begin pressing the MODE button) the peripherals that
willbeswitchedduringthenextpress(es)oftheCOMPUTER
button.
The seven segment numeric display indicates the computer
channel that is currently active.
COMPUTER button
Press to change to
the next computer
channel.
MODE button
Press to determine
which peripherals
should be switched
to another computer
channel (will occur
whentheCOMPUTER
button is pressed.