User guide

 




19
Configuration Menu Functions
(F1) Advanced Options
User Preferences
Routing status
Global Preferences
Setup Options
Edit Computer List
Edit User List
Edit Autoscan List
Restore Standard Mouse
Restore Intellimouse
Power Contr
ol
Reset to Factory Defaults
Send Data to RS232 port
Read Data from RS232 port
DDC Options
Power Contr
ol
OSD Colour
Reminder Banner
Reminder Colour
Screen Saver Type
Confirmation Box
Mouse Switching
Screen Saver
Autoscan Mode
Autoscan Period
OSD Dwell Time
User Timeout
RS232 Mouse Type
Mouse Type
Security
Language
Hotkeys
Keypad Contr
ols
Exclusive Use
Automatic Logout
Conguration menus layout
The menu options are arranged as shown here:
For a description of each option within the Conguration menus, see
Appendix 1 for more details.
To enable security
1 Display the Conguration menu.
2 Highlight ‘Setup Options’ and press .
3 Highlight ‘Security’ and press to select ‘ENABLED’.
4 Now create a new password for the ADMIN user account.
To set an ADMIN password
1 Display the Conguration menu.
2 Highlight ‘Edit User List’ and press .
3 Highlight ‘ADMIN’ and press . Press again to accept the name
‘ADMIN’ without change.
4 Enter an appropriate password for the ADMIN user account with regard to
the following:
• The password can be up to 12 characters long.
• The password can use letters, numerals and/or certain punctuation
marks.
• The password is not case sensitive.
5 Press . The ‘Edit Access Rights’ menu will be displayed. However, as the
ADMIN account always has access to all computers, press again to save
the new password.
What to do if the ADMIN password has been forgotten.
To change the hotkeys
When using the AdderLink IP in conjunction with the AdderView Matrix it will
be necessary to change the standard hotkeys for one of the devices. They both
use and as their standard hotkeys, so only the rst one in the chain
(usually the AdderLink IP) will respond to your requests. It is not important which
device is altered, however, ensure that the new setting does not clash with any
software being used on connected computers. The procedure shown here will
change the AdderView Matrix hotkeys, to alter the AdderLink IP hotkeys, please
see the AdderLink IP user guide.
1 Display the Conguration menu.
2 Highlight ‘Setup Options’ and press .
3 Highlight ‘Hotkeys’ and press to select the required hotkey
combination. The options are: CRTL+ALT, CTRL+SHIFT, ALT+SHIFT, ALT
GR, LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT, RIGHT CTRL+RIGHT ALT or
DISABLED.
4 Press to return to the ‘Conguration Menu’.