User manual

13
Standard hotkeys
The range of hotkey combinations are as follows:
Note: If your hotkeys have been changed, substitute them for and in
the examples given here.
Selects port 1
Selects port 2
• •
• •
then Selects port 10
Note: When entering multiple digit
addresses as above or for even longer
cascaded computers, keep and
pressed down until all other numbers have
been entered.
Selects the next available port
Selects autoscan mode where each
(authorised) port is displayed for a period
determined by the administrator. To
cancel autoscan mode, simply select any
xed channel using any of the suggested
methods.
Switches o the video signal – this will cause
a power saving monitor to enter its standby
mode. To awaken the monitor, simply
select any xed channel using any of the
suggested methods.
Logs out the current user (if security is
enabled) or selects port 0 to disable the
video signal (if security is disabled).
& , , or Moves the currently displayed on-screen
menu around the screen.
To select a computer using the on-screen menu
1 Select the on-screen menu in one of two ways:
• By simultaneously pressing and then releasing , or
• By pressing the middle and right buttons of a three button mouse.
Note: The mouse switching option is usable only if the ‘Mouse
Switching’ option is enabled. See Global preferences for more details.
At this point, depending on the security settings and the current log in
situation, one of two things will be displayed, either the login screen, or the
Selection menu:
2 Use the and keys to highlight the required computer name.
Alternatively (for large congurations), press to perform an alphabetical
search for a particular port name.
Note: If security has been enabled then only computers to which the current
user port has permission will be displayed.
3 Press to select the highlighted port.
To select a computer using mouse buttons
Note: This procedure works only with three-button devices and only if the
‘Mouse Switching’ option has been enabled by your administrator.
1 Hold down the middle button of the mouse.
2 Click the left mouse button to select the next computer port. When the
correct port is reached, release the middle button.
Note: If security has been enabled then only computers to which you have
permission will be displayed.
ADDERVIEW CATx 1000
Computer Port
Computer 1 01
Computer 2 02
Computer 3 03
Computer 4 04
Computer 5 05
Computer 6 06
Computer 7 07
Computer 8 08
User Status
ADMIN SHARED USE
F1-More menus F3-Find
Esc-Quit F4-Logout
The Selection Menu – here you can select
computers by name.