User guide

 









Cascading multiple units

The AdderView CATxIP 1000 units

support up to eight or sixteen

directly connected computer

systems, however, this is by

no means the limit. Instead of

connecting computers to every

output port, you can instead link

AdderView CATx 1000 units (not

IP variants). Thus, each output of

the original AdderView CATxIP

1000 unit can link through to

many more computers connected

to the secondary AdderView CATx

1000 units.

The combination of AdderView

units can be arranged two levels

deep forming a tree, or cascade

arrangement, with computer

systems situated at either level

within that cascade tree.

Note: It is not possible to cascade

two AdderView CATxIP 1000 units

together because they do not

have a Remote User Port on their

front panels. The lower units must

always be the non-IP AdderView

CATx 1000 variants.

The cascade tree

The diagram shows how an AdderView CATxIP 1000 unit and

multiple AdderView CATx 1000 units can be cascaded to two levels.

Computer systems can be connected at any level. The local or global

users can access computer systems situated anywhere within the

cascade tree.