User guide
23
Further information
This chapter contains a variety of information, including the following:
• Gettingassistance-seeright
• Generalspecications-seeright
• Appendix A - Options port pin-out
• Appendix B - EDID management
• Appendix C - Tested video resolutions
• Appendix D - Link cable interference protection
• Safety information
• Warranty
• Radio frequency energy statements
Getting assistance
If you are still experiencing problems after checking the information contained
within this guide, then we provide a number of other solutions:
• Online solutions and updates – www.adder.com/support
Check the Support section of the adder.com website for the latest solutions
and firmware updates.
• Adder Forum – forum.adder.com
Use our forum to access FAQs and discussions.
• Technical support – www.adder.com/contact-support-form
For technical support, use the contact form in the Support section of the
adder.com website - your regional office will then get in contact with you.
General specifications
Casing (w x h x d): 198mm (7.92”) x 44mm (1.76”) x 120mm (4.8”)
Construction: 1U compact case, robust metal design
Weight: 0.75kg (1.65lbs)
Mount kits: Rack mount - single or dual units per 1U slot.
VESA monitor / wall mount chassis.
Power to adaptor: 100-240VAC 50/60Hz, 0.8A,
Power to unit: 5VDC 20W
Operating temp: 0ºC to 40ºC (32ºF to 104ºF)
Approvals: CE, FCC
HT