User guide

 




16
Audio connections
The AdderLink XD522 units support analog and digital audio. Line in and
line out connectors are provided on both the transmitter and receiver units.
Additionally, the receiver has dedicated headphone and microphone jacks on its
front panel.
On the receiver, the analog portion of the Line Out socket on the rear panel
and the headphone socket on the front panel are joined and both provide
the same output (but have different electrical properties). For the Microphone
socket on the front panel and the Line In socket on the rear, you can choose
between the two inputs using a hotkey switch (see below for details).
From the Line
Out socket of
your audio
device
2 If a microphone is required, connect the 3.5mm jack from your microphone
to the socket on the front panel of the receiver unit.
3 Ensure that the microphone input is selected using the hotkey switch: Once
the AdderLink XD522 receiver is powered on, use a USB keyboard attached
to one of the A ports and press the key three times in succession. Then
press the 3 key (not from the numeric keypad), to select Microphone mode.
The icon will be displayed on screen to confirm your selection.
From your
speakers or
the Line In
socket of your
audio device
To connect headphones and/or a microphone
1 Connect the 3.5mm jack from your headphones to the socket on the
front panel of the receiver unit.
From your
headphones
or speakers
From your
microphone
2 Connect the 3.5mm jack from the Line Out socket of your audio device to
the Line In socket on the rear panel of the receiver unit.
3 Ensure that the Line In input is selected using the hotkey switch: Once the
AdderLink XD522 receiver is powered on, use a USB keyboard attached to
one of the A ports and press the key three times in succession. Then
press the 2 key (not from the numeric keypad), to select Line In mode. The
icon will be displayed on screen to confirm your selection.
continued
To connect speakers/line in/analog line out
1 Connect the 3.5mm jack from your powered speakers or the Line In socket
of your audio device to the Line Out socket on the rear panel of the
receiver unit.