User guide
15
USB connections
The AdderLink XD522 receiver provides four USB sockets on its front face:
From USB
device
To connect the USB ports
1 Connect the cable from your USB device to one of the vacant USB sockets
on the receiver front panel.
For Hi-Speed USB peripherals, such as mass storage devices,
use socket
Note: Low/full speed USB devices can be used on port B; the transfer speed will
be automatically reduced to support them.
These three sockets are all
labeled and provide
True Emulation ports for low/
full speed USB keyboards
and mice only. These are also
suitable for providing power to
3rd party DisplayPort adaptors.
The fourth socket is labeled and
delivers Hi-Speed USB providing that:
• Oneofthehostcomputer’sUSBsockets
is connected to the Link B socket on
the AdderLink XD522 transmitter and
supports USB v2.0, and
• ThesecondCATxlink(B)isinplace.