User guide
9
Installation
Mounting
There are two main mounting methods for transmitter and receiver units:
• Thesuppliedself-adhesiverubberfeet
• Optionalrackbrackets
Connections
Rack brackets
The optional brackets (plus four screws), allow the
units to be secured within a standard rack slot.
Note: The units and their power supplies
generate heat when in operation and
will become warm to the touch. Do not
enclose them or place them in locations
where air cannot circulate to cool the
equipment. Do not operate the equipment
in ambient temperatures exceeding 40
o
C.
Do not place the products in contact with
equipment whose surface temperature
exceeds 40
o
C.
HT